PAR 38
The par 38 is a very economical fixture. It is used mostly for up-lighting in small areas. With a 90W to 125W bulb it is not suitable for lighting large areas, but vignettes, buffet tables, etc are a great use for this light.
PAR 56
The par 56 is also a very economical. It is somewhat brighter with a 300W bulb. It is still best for smaller areas, but more versatile than the par 38.
PAR 64
The par 64 is used on stages, for concerts, and in theaters. Great for tent lighting with a 500W bulb. Lightweight & economical.
Great for small area lighting
Includes fixture, cord, plug, clamp, base, bulb, and gel frame
Polished fixture
Short barrel, compact size
300W sealed beam bulb - durable & economical
Great for color washes
Includes fixture, cord, plug, clamp, base, bulb, safety cable, & gel frame
Convenient - 4 fixtures per 20 amp circuit
Used for area lighting, indirect lighting, high spot lighting, & color washes
Includes fixture, cord, plug, bulb, clamp, base, safety cable, & gel frame
OPTI PAR
The Opti Par has become an industry standard. It's tough design and dependable use make it the light everyone should have. From tents to ballrooms, stages to theaters, it is one of the most versatile lights in the business.
Heavy duty cast aluminum body, can withstand tremendous usage
575W FLK bulb, available in regular or extended life choices
Changeable lenses
Usable for every application: uplighting, color wash, spotlighting, can be
dimmed
Low power consumption - approximately 5 amps
Includes fixture, cord, plug, clamp, bulb, base, safety cable, & gel frame
300 pound hanging weight
32 cross pole to hang lights
Can hang lights both horizontally & vertically
Powder coated for durable finish
Non-slip rubber cushioning
Attached ratchet straps
Use as a pair or singly
With the development of keder track tents, a new need has arisen in the lighting industry. TRACK HUGGER II has filled that need! Where the Pole Hugger II is ideal for interior poles and round legs, the TRACK HUGGER II fits into the keder track of your larger tents to mount you lights.
The TRACK HUGGER II is a single bar light hanger. It is sturdy and lightweight in construction. Because of its design, the TRACK HUGGER II will fit anywhere along the keder track of you tent. This gives you the freedom to hang your lights at whatever level best fits your installation. Just tighten the bolts and you are good to go. Easy, quick, and dependable, the TRACK HUGGER II makes lighting your keder track tents simple.
Pinspots are a great way to add drama to your event. Imagine a wedding or corporate event where nothing stood out. What would you remember? How dull or un-appealing the decor was? Pinspots can take care of this problem. With a small light fixture with a 50W bulb and focused beam, you can turn a dull, drab event into something unforgettable. Highlight table centerpieces, buffet decor, auction items, etc. When you draw attention to these items, people notice. They will remember how beautiful the room was or how the event in the tent took on an elegant feel. The effect will be remembered, and someone will ask for the same effect at their event.
Using pinspots is easy. Pinspots on a bar attached to the rafters or poles of a tent can be aimed wherever you want. They can be used in ballrooms aimed from the ceiling, light trees, or trusswork. You can use colored gels on standard pinspots, or program LEDs to the colors wanted, even to change colors. Pinspots, along with other lighting and effects can make a real impact.
PAR 46 PINSPOT
Small 50W light with a focused lens for spot lighting such as table centerpieces, auction items, displays, artwork, etc.
PINSPOT LED
This is a new item. It has a 3W white LED with a 12° beam angle lens (6° lens also included).
50W 12V halogen lamp with a long throw
Great for clubs or venues with high ceilings, tents, ballroms, etc.
Compact high-tech plastic case design
Long-life LED - 50,000 hour lamp life
Very low heat output, very low power consumption
Includes hanging bracket
Switchable power supply (90-240V, 50hz-60hz)
1 lb
ELLIPSOIDAL PROJECTOR
Stainless steel framing shutters to shape your lights to your needs
Heavy duty die-cast aluminum construction
Standard barrel is 36° Other sizes available - Call for info
Can use glass or steel gobos. Each uses a different gobo holder
Includes fixture, cord, plug, bulb, clamp, safety cable, & steel gobo holder
LED Lighting
*DMX-512 protocol (6 DMX Channels)
*Smooth projection & rich color from mixing the 61 Red, Green, Blue LEDs
*Extremely low heat
*Smooth color scrolling with Auto Mode
*Includes hanging bracket & metal stand for table top use.
*2 lbs.
*Can auto sync with other LEDs
*7 operational modes, 2 DMX modes
*Smooth, rich colors
*Long life (100,000hrs) Low heat, Low power consumption
*Variable speed color mixing, strobe, and dimming effects
*Dual bracket for hanging or setting on ground
*23.3W power consumption
*3 lbs.
*7 DMX channels, 6 DMX modes
*Smooth, rich colors, variable speed mixing
*Strobe effect
*Low heat output and power consumption
*Linkable with 3 pin XLR cables
*25W power consumption
Multi voltage operation (100-240V, 50/60Hz
*4 lbs
*Auto sync with other LEDs
*Smooth rich colors from RGB mixing
*Great for stages where heat is a problem
*Variable speed color mixing, strobe, & dimming
*Dual bracket for hanging or setting on ground
*30W power consumption
*6 lbs
*DMX-512 protocol - 3 DMX channels
*Very smooth projection with 151 UV LEDs
*Very low heat - Great for stages
*15 degree long throw
*21W power consumption
*Bracket for hanging
*4 lbs
*Full RGB color mixing
*7 DMX channels
*Sturdy high impact aluminum case
*3 pin DMX connection
*30W power consumption
*Optional 45° lens kit & barn doors available
*11 lbs
*Tri color RGB color mixing
*4 Operational modes
*Full dimming capabilities
*Sturdy high impact aluminum case
*25° beam angle
*Multi Voltage International PSU
*70W power consumption
*Double bracket for hanging or setting on ground
*5.3 lbs
*Built in receiver for wireless DMX
*50,000 hour rated LED life
*Built in color mixing, strobe, & dimming
*Three phase motors for faster pan/tilt
*Multi-voltage
*Fan cooled
*360W Power consumption
*20.6 lbs
*3 in 1 RGB LED produces up to 7 colors
*3 DMX channels, dimmer, strobe, color, & rotation
*Uses 3 extremely bright 3w 3 in 1 LEDs
*Multi voltage usage
*Wide beam spread covers a large area
*Extremely long life LEDs (100,000 hours)
*Hanging bracket
* 3 lbs
*3 DMX channels - Color, dimmer, & strobe
*4 button menu, easy to navigate
*Run all night - fan cooled
*Multi voltage auto sensing feature
*5.3 lbs
*UC3 controller sold separately
*7 DMX channel modes, 5 operational modes
*Great for architectural or stage settings
*Variable color mixing, strobe, & dimming
*40º beam angle, 36W power consumption
*8 lbs
*Comparable to 575W Wash fixtures
*10-16 DMX channels
*Low heat
*100,000 hr LED life rating
*3 pin DMX connectors
*300W power consumption
*16 lbs
*2 DMX control modes
*4 Operational modes
*Full dimming capability
*Sturdy high impact aluminum construction
*Double brackets for hanging or setting on ground
*Multi-voltage
*300W power consumption
*26.4 lbs
*2 DMX control modes
*4 Operational modes
*Full dimming capability
*Sturdy high impact aluminum construction
*Double brackets for hanging or setting on ground
*15° beam angle
Multi-voltage
*300W power consumption
*15.2 lbs
*RGB infinite color mixing
*Power/Data linkable
*DMX 512 or stand alone
*Full dimming capability
*Variable speed strobe effect
*20W power consumption
*40° beam angle
*Multi-voltage
*10 lbs
*RGB infinite color mixing
*Power/Data linkable
*DMX 512 or stand alone
*Full dimming capability
*Variable speed strobe effect
*Multi-voltage
*24W power consumption
*10 lbs
*RGB color mixing
*3 or 7 DMX channel modes
*4 Operational modes
*IP data link in/out - 3 pin DMX adapters included
*Full dimming capabilities
*25° Beam angle
*Multi-voltage
*70W Power consumption
*Adjustable single bracket for hanging or setting on ground
*36 High power LEDs
*Ideal for outside applications with wide coverage and impact resistant case
*Rich, smooth color changing
*50,000 hour LED life
*Fully DMX controlled
*25° Beam angle standard, 10° or 40° optional
*50W Power consumption
The Design Spot 250 has been a favorite of ours for years. It's multiple functions make it a great choice for events of all kinds. You and set it for sound active, and let the music do the work. Or you can program it through a controller to follow certain patterns. Whatever your choice, you can be sure to please a crowd.
The Power Spot 575II is a fast Moving Head Spot Fixture. It is a compact size with a lot of features. It has a 4.9 mw red laser. Great effects and lots of fun! 16 DMX channels.
8 dichroic colors + white
7 rotating, indexing gobos & 7 static gobos
3 facet prism
Iris with variable size & speed
Motorized focus
16 DMX channels
4 digit LED display
Great light for the price!
51 lbs
7 rotating, indexing gobos & 9 static gobos
3 facet prism
4.9 mw red laser
This is a great little light for the price. With 81 LEDs offering RGB & white, you will have color everywhere. Built in Master/slave:DMX512:&Sound Active programs are included. Great for clubs and parties. You can also purchase a bracket that holds 4 units for greater coverage. Order several!
With 500 red & green lasers and a 90° beam angle, this light can fill up a small room! Add a fog machine for even more effects. Turn on the music and let the sound run the light for you.
This is a new take on a light that has been around for a long time. Now it is an LED fixture. It uses the new Tri LED technology - three colors in 1 LED.
2 DMX modes:3 Channel mode:28 Channel mode
Color strobe effect & color mix effect fast to slow
Electronic dimming 0-100%
Linkable with 3 pin XLR cable to daisy chain
Compatable with UC3 Controller (sold seperately)
Multi-voltage operation
Low power consumption, low heat output
5 lbs
Very low power consumption - 12W
4 DMX channels - red laser, green laser, rotation, & macro
3 operational modes - DMX, sound active, & master/slave
Sound active from built in programs
Linkable via 3 pin XLR cables
6.1 lbs
Low power consumption, just 30W
Long life LEDs (100,000 hr life)
Multi -voltage operation
Can be daisy chained together
13 lbs
High quality mirrored glass
Lightweight and easy to hang
Great for clubs, schools, parties
16" and 20" Mirror Balls
3 RPM speed
Use with 16" mirror ball and up
Ideal for large venues
Comes with hanging bracket
Throws large amount of fluorescent UV over a large area
Comes with on/off switch & hanging bracket
Low power consumption
800 hour lamp life
24 lbs
Plastic high tech case design with hanging bracket
1 - 15 variable speed flashes per minute
Great for clubs, DJs, clubs, or special effects productions
3 lbs
Strobe lights are 45W variable speed with a flash adjustment knob and mounting bracket.
Weight 7 lbs each.
Can link up to 4 together
Operates on 120V or 220V
Controller is single channel.
Can control S - 100S strobes or Snap Shot II
Can be set for manual, black out, or sound active
60 lights per Rope Light.
Rope is wired in a 4 circuit series.
Weather resistant connectors.
Can be interconnected with 10 pieces
Available in clear, red, blue, green, yellow, or cleat with multi color lamps.
Lamps are 1W each
Control with RL - 101 controller for sound, speed, forward, reverse, & sound chase.
Controller sold separately
Heater stays hot, no warm up between fog blasts
LED low fluid indicator
25' cable remote, external fog control switch
15,000 cubic ft per minute fog output
8 minute warm up
5 liter removable fog fluid tank
Fluid consumption 1 liter per 7 minutes
22 lbs
CAUTION - Fog machines may set off smoke alarms
30' cable remote control controls timer, haze duration, haze intervals
1000 cubic ft per minute output
Tank capacity 1.25 liter
No warm-up necessary
Uses Haze G - Oil Base fluid only
27 lbs
CAUTION - Fog machines may set off smoke alarms